Marra Srl was established as a mould-maker in the early 70's and ever since, it has been involved in the production of moulds for fittings both for building and gas/water industry.Today, Marra Srl can confidently be considered one of the most avant-garde mould manufacturers in the fitting industry in Europe. Marra's workshop is equipped with the latest technological tools for the manufacturing of moulds, while its R&D technical department is to be considered one of the most advanced in the trade.Through its exclusive technological solutions for production of fittings, Marra offers its customers a variety of advantages when compared with the traditional molding systems.Some of them are listed below:thanks to their reduced dimensions, the moulds can be mounted on injection machines with lower tonnage; less time is consequently needed for demounting the moulds from the machine; less time is needed for substituting the interchangeable inserts because there is no need to dismantle the hydraulic cylinders. Furthermore, our technical solutions offer the following advantages:lower costs for the preservation of the moulds; lower damage risks for both moulds and machines; longer lasting performance of the moulds and shorter cycle times. Since the early 90's, beside its ever-increasing success in the fitting industry, Marra Srl has been dedicating itself to the production of moulds for the automotive industry, increasing its business in this market to the extent that today it covers more than 70% of its turnover.In this domain, the company focuses in the construction of moulds for outer and inner automobile component parts such as door, side and reinforcement panels, as well as bumper components.In order to guarantee the highest quality and reliability to its customers, the moulds are designed, manufactured and tested exclusively in our premises.The testing of the moulds is carried out in the commissioning department, that hosts four injection machines ranging from 250 to 2400 tons. The machines are exclusively used to test the moulds.
Mobile version
QR code
Link：Plastic mold
Marra Srl was established as a mould-maker in the early 70's and ever since, it has been involved in the production of moulds for fittings both for building and gas/water industry.Today, Marra Srl can confidently be considered one of the most avant-garde mould manufacturers in the fitting industry in Europe. Marra's workshop is equipped with the latest technological tools for the manufacturing of moulds, while its R&D technical department is to be considered one of the most advanced in the trade.Through its exclusive technological solutions for production of fittings, Marra offers its customers a variety of advantages when compared with the traditional molding systems.Some of them are listed below:thanks to their reduced dimensions, the moulds can be mounted on injection machines with lower tonnage; less time is consequently needed for demounting the moulds from the machine; less time is needed for substituting the interchangeable inserts because there is no need to dismantle the hydraulic cylinders. Furthermore, our technical solutions offer the following advantages:lower costs for the preservation of the moulds; lower damage risks for both moulds and machines; longer lasting performance of the moulds and shorter cycle times. Since the early 90's, beside its ever-increasing success in the fitting industry, Marra Srl has been dedicating itself to the production of moulds for the automotive industry, increasing its business in this market to the extent that today it covers more than 70% of its turnover.In this domain, the company focuses in the construction of moulds for outer and inner automobile component parts such as door, side and reinforcement panels, as well as bumper components.In order to guarantee the highest quality and reliability to its customers, the moulds are designed, manufactured and tested exclusively in our premises.The testing of the moulds is carried out in the commissioning department, that hosts four injection machines ranging from 250 to 2400 tons. The machines are exclusively used to test the moulds.
